Compact, lightweight and portable. A cost-effective solution for bringing ECG, pulse oximetry, noninvasive blood pressure, temperature, and respiration to hospitals, clinics, and private offices. The Scholar ® III combines all essential standard-of-care parameters for vital signs monitoring and conscious sedation procedures in one compact system. Continuously monitor five critical parameters (ECG, DOX™ digital pulse oximetry, ComfortCuff™ NIBP, temperature, and respiration) on a broad range of patients, from neonate to adult. The high resolution color TFT screen optimizes viewing of three patient waveforms while presenting digital values on large color-coded LED’s.

• Standard: ECG, ComfortCuff NIBP, DOX SpO2, HR, Temperature and Respiration.
• Optional color LCD/LED display combination conveniently separates waveforms and digital information to optimize viewing of vital patient data and minimize visual clutter.
• Built-in printer provides demand, automatic interval, or trend memory printouts.
• Unique DOX digital SpO2 technology for improved pulse recognition and artifact rejection.
• Proprietary ComfortCuff NIBP measures on inflation for faster, more comfortable readings.
• Built-in, rechargeable battery provides uninterrupted patient monitoring during transport or power failure.
• Easy-to-understand controls and menus for fast, simple operation.

ECG
Number of Leads: 3
Lead Selection: I, II, III
Gain Selection: 0.5 mV, 1 mV, 2 mV, 4 mV, 8 mV full scale
Frequency Response: Diagnostic: 0.05 to 100 Hz Monitor: 0.5 to 40 Hz
Isolation: Conforms to IEC 601-1
Sweep Speed: 25, 50 mm/sec
Electrosurgery Protection: Yes
Defibrillation Protection: Yes
Pacer Rejection: Yes

Heart Rate Display and Alarms
Range: 30 to 300 BPM (ECG, SpO2 only)
Accuracy: > of ±1 BPM or 1%
Alarm Indication: Audible, Visual
Alarm Volume: Adjustable: 10 settings + Off, user-selectable
Alarm Silence: Yes, 2 minutes

Noninvasive Blood Pressure
Technique: Automatic oscillometric upon inflation
Max. Inflation Pressure: Adult 300mmHg; Neonate 150mmHg
Automatic Measurement Cycles: 1, 2, 3, 5, 10, 15, 30, and 60 min; STAT pressure interval is 5 minutes

Impedance Respiration
Range: 9 to 150 breaths/minute
Resolution: 1 breath/minute
Accuracy: > of ±1% or ±1 breath/minute

Temperature
Range: 20 to 45° C, 68 to 113° F
Accuracy: ± 0.1° C
Display Resolution: 0.1° C or 0.1° F
Probe: YSI-400 Series

Oxygen Saturation (SpO2)
Averaging Time: Selectable 3 to 21 seconds
Search Time: Selectable, 10 to 40 seconds
Waveform: User Selectable
Gain: User Selectable
Sensor Type: Reusables: DOX™, MultiSite™, SHELL™; Disposables: Adult, Pediatric, Infant, Neonatal
Audio: Beep with each detected pulse, pitch varies with oxygen saturation
Range: 1 to 99%
Resolution: 1%
Accuracy: ±2% (70 to 99%); ±3% (50 to 70%)
Method: Dual wavelength LED

External Power Supply
Input Voltage: 90-260 VAC; 47-63 Hz
Output Voltage: 16V DC

Operating Environment
Temperature: 15° to 40° C (59° to 104° F)
Humidity: 15 to 90% (non-condensing)
Storage Temperature: -5° to 50° C (23 to 122° F)

Display
Main Display: Active color LCD or monochrome
Size: 4.76" (121mm) W x 3.58" (91mm) H
Resolution: 320 pixels W x 240 pixels H
Numerical Display: LED (green: SpO2%; red: Rate, Sys, Dia, Map)
Number of Traces: 3 maximum

System Outputs
Digital: DB-9 (serial interface)
Analog Output: BNC, ±1V range

Trends
Memory: 24 hours of tabular patient data at 3-minute NIBP interval and 1 minute other parameters

Battery
Type: Rechargeable lead acid
Life: 1 hour
Recharge Time: 6 hours to 100% capacity

Physical Properties
Size: 19 cm (7.6”) H x 26 cm (10.125”) W x 25 cm (9.75”) D
Weight: 3.83 kg (8.5 lbs)

Classifications
Type of Protection: Class I equipment
Degree of Protection: Type CF defibrillator-proof equipment
Protection Against Liquids: IPX1, drip-proof equipment

Approved by UL, CSA, CE.

Specifications subject to change without notice.

ECG ACCESSORIES

NIBP ACCESSORIES

Cuffs

* Must use NIBP Hose 708 for Neonates

Temperature Probes

SPO2 ACCESSORIES

Sensors

OTHER ACCESSORIES AVAILABLE